Knowledge Base

Configure a Long Range PtP Link with Indoor Wireless Coverage

In this example, you should first refer to Configure a Layer-2 Point-to-Point Link and Configure a Long Range Wireless CPE

click the diagram for higher resolution view.

Setup Guide

1) Connect to the base station using a CPE. The example here is using WISP mode.

2) Enable the DHCP server of the WISP CPE. The IP range could be

3) Power on the WIS-CM2300, after login the web interface, go to Wireless page, input the ssid of your wireless network, setting the encryption at advanced settings , and press Apply & Save.

4) Use a computer or cell phone connecting to the wireless ssid just defined to check the Internet availability.