Knowledge Base

Configure a Long Range Wireless CPE

1. After login the web interface, go to Wireless page, press scan

wait for several seconds you can see the base station list, choose your base station and press the ssid

back to the wireless page, find the advanced setting->distance, fill in the range with 150% of your actual range, e.g. if range is 10km, you should fill in with 15km.

press 'Apply' and 'Save'.

2. Go to Network page, choose WISP mode, and fill in the information provided by your WISP. In this step, better enable the LAN DHCP server.

3. Set your computer to "Obtain IP Address Automatically", and connect the Ethernet port of your computer to the CPE. Check the Internet status.